Waterproof LED Lighting

Our same high-quality LED Light Strips (3528 LEDs), 300 per meter, but in the longest length available - 5 meters

Features:

• Waterproof design (silicone covered)

• 120 LEDs per meter (the most available per meter)

• 12 Volt or 24 Volt (please specify when ordering).  

• Low power consumption (less than 0.2A per meter)

• Dimmable (see our PWM dimmers).  Note:  high-power LED strips are controlled best by PWM dimmers.  Simple rheostats provide limited dimming.

• 3M tape applied to the reverse side for easier installation

• Trimmable approximately every 3"  (re-use of cut segments requires professional soldering techniques)

• Super bright LED output (3528 LEDs)

Available in single color:  Red, Blue, Cool White and Green LED

Available in dual-color in:  Red/White (sorry, out of stock), Blue/White  (see our separate listing for these options)

Available in voltages:  12-14VDC and 24-28VDC

Select your options below

Similar to our existing 4", 6" and 8" LED Strip lights

Variable length - add 6" sections to create the length needed for your application - 6, 12, 18, 24, 30, 36" or more, as needed.

Each segment contains 12 high-power LEDs in a waterproof and vibration proof housing.

Segments include these parts:  A.  Main body;  B. End Cap with Wires;  C.  Fixed End Cap, D.  Rubber Grommet

Technical details:  12VDC.  Power consumption:  80mA per segment (@12VDC).  Lumen output:  About 30 Lumen per segment

Installation notes - 

To add segments, remove the Fixed End Cap and add additional Main Body segments in series.  Trim rubber gasket material to fit.

Versatile 8" LED Strip Light

Features 18 super bright White LEDs in a sturdy and sealed housing.  waterproof and vibration resistant design - 54 Lumen output

Fully submersion-rated waterproof and vibration resistant

High quality housing and construction, 12 Volt DC (13.8VDC systems). Current draw - just 120mA

Fresnel lens improves lighting distribution.  

Pop-off end-caps conceal mounting hardware (hardware included)

Rubber bottom gasket permits a tight fitting installation. Underside of gasket contains clever channels for routing wirings while permitting the fixture to fit flush

A high quality and strudy LED fixture for boats, utility vehicles, RV's or anywhere you need lighting

Select either:  Cool White LEDs (5000K) or RED LEDs

Product:  STRIP-8"-Series

Model number:  OR-CL3B-6LED-SERIES-12V

This small oval (2 7/8" width) LED convenience, courtesy, reading and map light is an ideal lighting source for your RV, Truck, Car, Utility Vehicle, Boat or Aircraft.

This high quality surface-mounted waterproof and vibration resistant product is found in high-end automotive and marine vehicles worldwide.

Designed for installations where space is at a premium, this Mini fixture is just 2 7/8" wide and just 1 1/4" high and needs just 0.5" of depth.

Its fresnel lens and three (3) WARM WHITE LEDs provide a surprisingly bright light source for a convenience light. 

Fully dimmable (see our other listings for PWM dimmers), this Mini fixture operates with very little power (about 100mA) and is operated from any 12 volt power source.

The lamp is designed for surface mounting and mounts easy using included hardware.

A 3/4" diameter hole is needed for the rear housing.

Metal cover snaps over the waterproof housing to creat a clean-looking installation.

Three options (select your option):

A.  Black finish cover - White LED

B.  Stainless steel cover - White LED

C.  Stainless steel cover - Blue LED

Easy to wire and operate, this lighting fixture makes for a very attractive looking installation.

Specifications: 2 7/8" finished width. Mounting hole size: 0.75 depth x 0.5" depth.