PWM Dimmers 12 and 24 Volt

Product Details:

• Extremely powerful PWM Dimmer - 7 Amps capacity
• New self-contained housing with easy-to-use "Fast-On" Connectors (0.250" push-on terminals) 
• Perfect for controlling interior lighting inside your RV, Truck, Auto, Boat or Aircraft.
• Easy-to-install, on/off switch on rheostat.  
• Designed to control both LED and Incandescent lighting - 7 Amps per channel
• 12 Volt Pulse Wave Modulation (PWM) Electronic Dimmer for DC Lighting Applications
• Advanced design includes over-current protection, reverse polarity protection and over-voltage protection
• Self-contained  3" x 1.25" x 1.25" size
• To mount, drill a single 0.267" (17/64")(6.75mm) hole - insert rheostat shaft and secure with included nuts/washers
• Rear case 0.250" push-on connections for:  12-14V Positive (+) Input;  Input Ground (-).  Output: Positive (+) and Ground (-)
• High-quality push-on type knob.
• New improved rheostat with 12mm of thread for mounting in thicker panels
• "High side" dimmer - it connects between your 12V power source and the LED / Incandescent load

PART NUMBER:  12VDimmer01-7A-V2

**NEW**

ULTRA HIGH POWER 30 AMP

12V (12-14V) PWM (PULSE WAVE MODULATION) DIMMER

• Extremely powerful PWM Dimmer - 30 Amps capacity 
• Perfect for controlling large banks of LED lighting.
• Easy-to-install, on/off switch on rheostat.  High quality fluted knob included.
• Designed to control both LED and Incandescent lighting - 30 Amps maximum
• 12-14 Volt 
• Pulse Wave Modulation (PWM) Electronic Dimmer for DC Lighting Applications;  100 Hz PWM
• Advanced design includes over-current protection, reverse polarity protection and over-voltage protection
• On board ATM fuse for additional protection
• Modular construction - Separate Rheostat and Dimmer PCB.  Rheostat shaft diameter is 0.267" (17/64")(6.75mm).  Dimmer PCB (6" x 4" x 2.5") has 12 AWG screw-down input and output terminals
• Color-coded wiring for easy installation of rheostat.  30cm of wire 
• On/Off Switch on Rheostat
• New improved rheostat with 12mm of thread for mounting in thicker panels
• Dimmer case designed for vertical mounting (or zip-tie as needed)
• "High side" dimmer - connects between your power source and the LED / Incandescent load.

PART NUMBER:  12VDimmer01-30A-REMOTE 

** New **

This self-contained dimming controller kit is designed to operate small indoor LED lighting products like Micro-Pivoting, Eyeball and Cabinet Lamps.  

It plugs into any wall outlet and provides an on/off and dimming function for up to 15 small lamps (lamps sold separately - select any style recessed or surface-mount small lamp).

Ideal for controlling lighting for display cabinets, art lighting and other similar ideas.

The kit includes a dimming controller box, wall-adapter power supply and connection cables to connect to your small lamps.  A small rheostat on the controller is used for both on/off and dimming functions.

Product highlights:

Wall transformer operates at 12VDC, 2A

Compatible lamps are typically 1W or 3W, constant current, 3.2V to 3.5V 

Only similar output lamps may be used together but can include Micro-Pivoting and Recessed Eyeball lamp designs (however, you can not mix 3W with 1W lamps using the same control box)

Up to 15 small lamps may be interconnected, using optional 4-way and 8-way connectors

Control box size:   5" x 2.75" x 2" high

Using included components, lamps may be placed over six (6') feet away from the control box.  

Contact us if you have additional specific requirements regarding the number or placement of lamps.  We have optional components available to fit most applications.

Kit contents:

• Dimming control box
• Power supply (12V, 2A)
• One (1) - 12" interconnect cables
• One (1) - six foot (6') interconnection cable (dimmer-to-lamp)
• Two (2) - Lamp adapter cable sets (this cable connects the lamps to the 12" interconnect cables)

Additional available options:

• Three foot (3') interconnection cable

• Six foot (6') interconnection cable

• 12" interconnection cable

• 4-way interconnection box

• 8-way interconnection box

SKU:  PDC-7A

Extremely powerful PWM Dimmer - 2 Channel Design (for 24-28VDC systems) 

Each Channel has 7 Amps capacity 

Perfect for controlling interior lighting inside your RV, Truck, Auto, Boat or Aircraft. 

Easy-to-install, on/off switch on each rheostat.  

Designed to control both LED and Incandescent lighting 

7 Amps per channel 12 Volt Pulse Wave Modulation (PWM) Electronic Dimmer for DC Lighting Applications.  

Advanced design includes over-current protection, reverse polarity protection and over-voltage protection.  

Each of two (2) rheostats control independent circuits.

Self-contained 2.5" x 2.5" format.  

Dual 1/4" shaft and screw-down input and output terminals In use on numerous RVs, marine vehicles, trucks and aircraft (including several LSA models)

"High side" dimmer - connects between your power source and the LED / Incandescent load.

Part Number:  24VDimmer02-7A